Controls And Connections - Q108 Us Market Only - REL Acoustics Q Series Operating Instructions Manual

CONTROLS AND CONNECTIONS - Q108 US MARKET ONLY

1 PHASE switch 0 and 180 degrees. Phase selection affects both high and low level inputs.
2 CROSS OVER. Adjust to set the roll off frequency of the sub bass system.
3 XOVER. Switches the CROSS OVER in or out. Only affects LFE input, always active for
high level input.
4 LO LEVEL input volume control. Adjust for output level when using LO LEVEL phono input.
5 HI LEVEL input volume control. Adjust for output level when using HI LEVEL Neutrik input.
6 PC. Low level input 3.5mm jack socket. Used to connect the Sub Bass System to a
computer.
7 LFE input phono socket. Used to connect the Sub Bass System to the LFE/Sub output of a
5.1 channel amplifier or processor.
8 HI LEVEL input Neutrik Speakon socket. Used to connect the Sub Bass System to the main
front speaker terminals on the amplifier.
9 IEC Mains input socket.
1 2 3 4
POWER
0 180 41HZ IN OUT
26HZ 106HZ MIN
PHASE CROSS OVER XOVER
Q108
100 WATT MOSFET SUB-BASS SPEAKER SYSTEM
PROTECTED BY
CE
~ 110-120 VAC 50-60 HZ
FUSE 3.15 A/T
REL ACOUSTICS LTD NORTH ROAD BRIDGEND
http://REL.net
REL Acoustics 'Q' range User manual
5
MIN MAX
MAX
HI LEVEL
LO LEVEL
HI LEVEL
R
CF31 3TP UNITED KINGDOM
FAX: +44 (0) 1656 766093
9
6
PC
7
LFE
8
9