Design Safety; Important - REL Acoustics Q Series Operating Instructions Manual

DESIGN SAFETY

This apparatus is designed to Class II specification and is double insulated,
This apparatus is supplied with a fitted mains plug. For UK operation a 5 Amp fuse is fitted in the
plug. Should the fuse need to be replaced use a similar rated fuse approved to ASTA or BSI 362.
Do not use without the fuse cover in place. Replacement fuse covers are available from your dealer.
If for any reason the plug is cut off it must NOT be re used. Please dispose of any such plug safely.
There is a danger of electric shock if the cut off plug is inserted into a mains socket.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow
Blue
Brown
As the colours of the wires in the mains lead may not correspond with the markings identifying the
terminals in the replacement mains plug, proceed as follows:
- The wire coloured Green and Yellow must be connected to the terminal marked with the
letter "E" or with the earth symbol
- The wire coloured Blue must be connected to the terminal marked with the letter "N"
- The wire coloured Brown must be connected to the terminal marked with the letter "L"
This product is CE marked and has been tested to ensure it satisfies all relevant standards.
It satisfies all relevant standards for Conducted Emissions, Radiated Emissions, Susceptibility and
Immunity.
It also complies with the requirements relating to class II construction detailed in clauses 9 & 10 of BS
EN 60065 1994
It also satisfies all relevant safety tests for consumer use provided it is used within the guidelines of
this manual.
therefore it does not require to be earthed.
-
-
-
REL Acoustics 'Q' range User manual
Earth
Neutral
Live
6