Running In; Care And Polishing - REL Acoustics Q Series Operating Instructions Manual

REL Acoustics 'Q' range User manual

RUNNING IN

Care taken over running in will be rewarded by many years of pleasurable use. Both the electronics
and the drive unit will benefit from an initial period of carefully controlled use. Possible damage may
be sustained by running in the unit at too high a volume setting over an extended period. On the
other hand, by taking a little care over this initial period, about 24 hours of actual use, a longer life
with a higher potential eventual performance is assured.

CARE AND POLISHING

Grittex (sprayed) finishes:
These are best maintained by careful dusting with a lint free cloth. Alternatively, a soft bristled brush
may be used to sweep off any dust failing on the surface. If objects are to be placed upon the top, it is
advisable to use a small mat to protect the surface and to avoid the risk of rattles.
Wood veneer finishes:
Dusting as above, plus the occasional polishing with a good quality furniture polish for the wood
veneers. Treat the finish as you would any other piece of quality furniture in your home.
20