Table of Contents
Advertisement
To connect to the power amplifier using the UNBALANCED Neutrik high level
input.
To engage the Neutrik Speakon plug, insert fully into socket and rotate clockwise until locked.
To remove the Neutrik Speakon plug, grip body of plug, place thumb on chrome lever, move lever
backwards rotate plug anti-clockwise (counter-clockwise in the US) quarter turn and withdraw.
The high level input is designed to accept the stereo (two channel) signals from the speaker
terminals of your receiver, integrated amplifier, and basic amplifiers. This has the advantage of
ensuring that your subwoofer receives exactly the same signal as the main speakers, which means
that the character of the bass from the main system is carried forward into the sub-bass. This is a
very important point and together with the REL's ABC circuitry, ensures far superior system
integration of the sub-bass with the main system.
HI LEVEL input
** NOT SUPPLIED WITH QUAKE
High Level connections should be made to the same binding posts as the main speakers.
Connect as shown above. Red to amplifier main right speaker red terminal, yellow to amplifier main
left speaker red terminal and black to amplifier main speaker black terminal, right or left but not both.
Plug the Neutrik Speakon plug into the HI LEVEL Neutrik socket.
The output level is adjusted using the control marked HI LEVEL.
**Supplied Neutrik Speakon High level Interconnect
RELease lever
REL Acoustics 'Q' range User manual
YELLOW
+
-
BLACK
L
RED
Amplifier main speaker outputs
13
+
-
R
Hide quick links:
Advertisement
Table of Contents
