Verizon TR1V1 User Manual page 12

3. Once the bracket is securely affixed to the window, align the mounting head on the Extender with
the installation slot on the bracket, then push down on the Extender to insert the mounting head
into the slot. Adjust the alignment of the Extender as required (make sure the raised nubs on the
mounting head fit into the dimple holes on the inside of the slot, and that the hole for the DC jack
is aligned with the hole for the AC adapter on the bottom of the slot).
4. Once the desired alignment is achieved, use a screwdriver to screw the securing screw through
the designated hole on the bottom of the installation slot and into one of the screw holes on the
mounting head of the Extender. Make sure the screw is screwed in tightly and is not loose.
5. Use the provided cable clips for cable management. You may also install the provided window
wedges to prevent sliding windows from colliding with the installed Extender.
6. To remove the mounting bracket from window glass, first unplug the AC adapter from the DC
jack. Afterwards, use a prying tool or other suitable flat object (such as a flathead screwdriver)
and use it to pry the mounting bracket off the window by carefully wedging it between the window
glass and the Gecko Tape.
8