Verizon TR1V1 User Manual page 10

2. Bracket cover
This cover is attached to the top of the bracket's base. Remove the cover before attaching the
mounting bracket to a wall.
3. Installation slot
Install the mounting head of the Extender into this slot. Once installed in this slot, the Extender
can be rotated to either the left or to the right if the central position is not adequate for
performance purposes.
4. Securing screw
Once the desired alignment for the Extender is found, this screw is used to ensure that the
Extender is securely attached to the mounting bracket.
5. Hole for AC adapter
This hole enables the cable from the AC adapter to connect to the DC jack when the Extender is
installed on the mounting bracket.
6. Hole for securing screw
This hole should be aligned with one of the screw holes on the mounting head of the Extender.
6