Connecting A Blu Mk Ii Or Hugo M Scaler To Dave - Chord DAVE Manual

Chord Electronics
DAVE | Manual
_
Connecting a BLU MK II or
Hugo M Scaler to DAVE
If you intend to use BLU MK II or
Hugo M Scaler with DAVE, you
should use the dual BNC cables
provided to connect the two
devices. You must also connect
your source inputs to the BLU
MKII or M Scaler and not DAVE.
Using the dual BNC cables;
1) Connect the outputs of BLU
MKII or Hugo M Scaler to the
dual BNC inputs on
DAVE. Please pay close
attention to the numbering on
the units.
2) Ensure the cables click into
the connectors securely.
OPT OUT S/PDIF
DUAL BNC OUT
19 // 35
4.1 Placement
4.2 Connecting your source to
DAVE
4.3 Connecting a BLU MK II or
Hugo M Scaler to DAVE
4.3
3) Once connected, please read
the manuals for either BLU Mk
II or Hugo M scaler to set up.
Also ensure you have
downloaded the drivers for
BLU MK II or Hugo M Scaler
from our website.
chordelectronics.co.uk/
product/
4.4 Connecting a preamplifier/
amplifier to DAVE
4.5 Powering DAVE