Dsd And Pcm Mode - Chord DAVE Manual

Chord Electronics
DAVE | Manual
_

DSD and PCM mode

DAVE has two decoding options
specifically tailored for PCM
or DSD playback. You can play
both PCM and DSD music using
either mode, but each one is
specifically optimised for a
particular format. In order
to cycle between each mode
please highlight the segment,
typically by pressing the down
button and then either press
the left or right button for two
seconds.
PCM+ - Use this for PCM
playback up to 768 KHz. DSD
playback up to DSD256 is also
supported, but it is decimated
and not optimised in this mode.
DSD+ - Use this for DSD64,
128 and 256 (single, dual and
quad-speed) playback. There is
no decimation. PCM can still be
played and this mode is ideal for
streaming video with audio as it
has a lower delay.
31 // 35
7.1 DSD and PCM mode
7.2 Crossfeed
7.1
Please note, after either
decoding function, DAVE will
mute for approx 20 seconds
while the new program activates.
7.3 Settings memory &
galvanic isolation
7.4 Display messages