Powering Dave - Chord DAVE Manual

Chord Electronics
DAVE | Manual
_

Powering DAVE

POWER ON SEQUENCE:
Once set up with cables,
use the supplied power
cable to connect DAVE. To turn
DAVE on, locate the large power
switch on the back of the device.
It may take 15 seconds for DAVE
to complete a safety check.
During this stage, music playback
will not be possible and mute will
be displayed.
21 // 35
4.1 Placement
4.2 Connecting your source to
DAVE
4.3 Connecting a BLU MK II or
Hugo M Scaler to DAVE
4.5
During this period,
do not initiate music
playback.
4.4 Connecting a preamplifier/
amplifier to DAVE
4.5

Powering DAVE

NOTE: DAVE can
be put into standby
mode with the off
button on the remote.