Connecting Your Source To; Dave | Manual; Placement; Connecting Your Source To Dave - Chord DAVE Manual

Chord Electronics

DAVE | Manual

_

Connecting your source to

DAVE
DAVE has a selection of different
inputs and you can connect
several sources at once if you
wish.
Please note that if you are using
the USB input with a Mac/Linux
device, you will not need a
driver, but if you are connecting
a Windows device, it will need a
driver from the DAVE section of
our website:
chordelectronics.co.uk/product/
dave
18 // 35
4.1

Placement

4.2 Connecting your source to
DAVE
4.3 Connecting a BLU MK II or
Hugo M Scaler to DAVE
4.2
To set up your system:
1) First, you must ensure that
DAVE and any
connecting equipment,
is turned off.
2) Locate the inputs on the back
of the unit shown below.
3) Select the correct outputs
from your source device
and insert the cables into
the input ports on the DAVE.
Input
4.4 Connecting a preamplifier/
amplifier to DAVE
4.5 Powering DAVE