Chord DAVE Manual page 28

Chord Electronics
DAVE | Manual
_
Preamplification mode
Providing headphones are
not connected to DAVE,
Preamplification mode can
be manually engaged. Select
Preamplification mode by
holding down the right and left
buttons for two seconds.
Preamplification mode deploys
DAVE's digital preamplifier
capabilities, enabling the volume
to be attenuated to prevent
clipping or to feed directly into
a power amplifier or active
speaker.
28 // 35
6.1 Playback modes
6.2 Headphone mode
6.3
Volume
plus Phase Pos
L ON Display 1
D DAVE
Digital pre
6.3 Preamplification mode
6.4 DAC mode
WARNING: For
the protection of
your hearing and
equipment, please do not
navigate between the
Preamp and DAC modes or
have music playing without
disconnecting DAVE from
any other device or a source