Protection Against Liquids & Heat - Chord DAVE Manual

Chord Electronics
DAVE | Manual
_
Protection against
liquids & heat
DAVE is not protected
against liquids of any
kind. Never place
containers of liquid on DAVE.
Never allow DAVE to come
into contact with moisture or
liquids; doing so could result
in electrocution or damage to
DAVE's internal circuitry.
Be aware that liquids, including
water that has dried, can leave
minerals that can affect the
PCB and other components,
which could eventually lead to
oxidisation and short-circuiting.
If DAVE comes into contact
with moisture or liquids,
immediately disconnect from
the power supply and connected
equipment, and contact Chord
Electronics for further advice.
5 // 35
1.1 Introduction
1.2 Protection against
liquids & heat
1.2
DAVE has internal
thermal protection
which will shut down
the unit in the event of excessive
temperatures being reached.
Never operate DAVE near
sources of heat or naked flames
as this will decrease the lifespan
of the internal components.
It is advised that you do not
operate DAVE in an area of direct
sunlight or on top of significant
heat-producing devices.
Please be aware that it is entirely
normal for DAVE to become
warm during use.
If you are concerned about the
temperatures, please switch the
device off or consider a different
placement.
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment