Automatic Programmes - AEG BEE641221M User Manual

5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION.
4. Touch
5. Use
DURATION.
6. Touch
the setting of the END function.
The display shows flashing
7. Use
or
minutes and then the hours.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
the display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
dot shows which clock
function is on in the Clock /
residual heat display.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
again and again until
or to set the minutes for
.
or to set the hours for
, the appliance switches to
.
or to set the END and
to confirm. First you set the
and the time setting flash in
with a dot and . The
7.6 Setting the MINUTE
MINDER
1. Touch .
and "00" flash in the display.
2. Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use or to set the MINUTE
MINDER and
4. Touch or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
7.7 COUNT UP TIMER
1. To reset the Count Up Timer, touch
again and again until
the display.
2. Touch until the display shows
"00:00" and the Count Up Timer
starts to count up again.
when you do not have the knowledge or
experience on how to prepare a dish.
The display shows the default cooking
times for all automatic programmes.
ENGLISH 13
to confirm.
flashes in