Advertisement
Quick Links
ercol
teramo 2610 Dressing Table
Thank you for purchasing this teramo dressing table. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product. Installation shall be carried out exactly according to the manufacturers
instructions, otherwise a safety risk can occur if incorrectly installed.
WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.
This item is HEAVY
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this leaflet. If any components are missing, please contact the retailer from whom you bought
this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 30 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Necessary Tools
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ercol Teramo 2610
Summary of Contents for Ercol Teramo 2610
- Page 1 2610 Dressing Table Thank you for purchasing this teramo dressing table. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Installation shall be carried out exactly according to the manufacturers instructions, otherwise a safety risk can occur if incorrectly installed.
- Page 2 Fittings and parts checklist Top & Drawer box x 1 Brackets x 2 Left leg x 1 Strap x 1 Screws x 1 Right leg x 1 Left mirror support x 1 Wedge x 2 Right mirror support x 1 M6*30 Bolt x 12 Mirror x 1 Allen key x 1...
- Page 3 Step by step assembly instructions 1. Take the drawer out of the drawer box(A) unit as shown below. e left leg(B) and right leg(C) onto t(A) using M6*30 bolt(K) 8pcs as shown below.
- Page 4 3. Attach the left mirror support(D) and right mirror support(E) onto the drawer box unit(A) using the 4pcs M6*30 bolt(K) as shown below. Put the mirror(F) onto the mirror supports(D&E) as shown below. Rotate the dials on the support rial to adjust the mirror angle.
- Page 5 5. Put back 2pcs drawers into the drawer box unit (A) and assembly steps finished.
- Page 6 Wall fixing - if in doubt seek professional advice Wood Cavity wall Brick or Masonry If fixing to wood Special toggle Use an appropriate make sure that it wall plugs are wall plug provided you isn’t chipboard as needed. Seek are sure your wall is screws can easily pull expert advice...
- Page 7 9. If the dressing table is not level on your floor, use the wedges provided. Snap them off so they do not protrude out from the table legs. You can also snap them lengthways. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com...
Need help?
Do you have a question about the Teramo 2610 and is the answer not in the manual?
Questions and answers