Page 1
2645 cantilever chair Thank you for purchasing this cantilever chair. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Necessary Tools Please check the pack contents before attempting to assemble this product.
Page 2
Step by step instructions 1) Place the seat and back of the chair upside down on a table or flat surface. 2) Place the white spacers (B) on to the seat holes. Place the up turned metal frame onto the seat. Place the bolts (A) in the holes, through into the seat and tighten using the alan key provided.
Need help?
Do you have a question about the Cantilever 2645 and is the answer not in the manual?
Questions and answers