Table of Contents
Advertisement
20
1U Higher Voltage DC PDU (240V/380V): Installation and Maintenance Guide
4. Orient the PDU so that the vent holes are facing up. Hold the PDU at a slight
angle and carefully insert it into the 1U mounting space in the rack. Pushing
in slightly on both of the adjustable mounting rails helps clear the rails from
the rack flanges.
5. Secure the end of the PDU that has the short mounting brackets to the rack
first. Make sure that the short mounting brackets are aligned with the outside
of the rack flanges. Attach the brackets to the rack flanges with two M6
screws and two cage nuts or clip nuts per bracket. Use the cage nuts or clip
nuts and the screws that come with the rack-mounting kit.
6. Secure the adjustable mounting rails and the 1U blank filler panel to the rack.
Adjustable mounting rails
Advertisement
Table of Contents
