Installing The Pdu In The Side Of An Ibm Enterprise Rack Only - IBM System X High Voltage DC PDU Installation And Maintenance Manual

Installing the PDU in the side of an IBM Enterprise rack only

About this task
Attention: You must install the PDU with the front panel facing either the front
or rear of the rack, either horizontally or vertically with the cable end at the
bottom; do not install the PDU with the front panel facing up or down, or
vertically with the cable end at the top.
12
1U Higher Voltage DC PDU (240V/380V): Installation and Maintenance Guide
Supported orientation
Unsupported orientation
Ground
Ground