Table of Contents
Advertisement
2. If the adjustable mounting rail is not assembled, complete the following steps
to assemble it:
a. Align the two parts of the adjustable mounting rail as shown in the
following illustration.
b. Secure the two adjustable mounting rail parts with three screws that come
with the rack-mounting kit.
3. Align the adjustable mounting rails with the holes in the side rear of the PDU
and attach the mounting rails to the PDU with three M3 pan-head screws
with captive lock washers per rail. Use the screws that come with the
rack-mounting kit.
Short mounting bracket
Adjustable mounting rail
Chapter 3. Installing the 1U PDU horizontally in a rack
19
Advertisement
Table of Contents
