Closing The Adapter; To Close The Adapter; Mounting The Adapter; To Mount The Adapter To The Unit - Daikin BRP069A71 Installation Manual

6 Starting up the system

a Connector
INFORMATION
Where to connect the electrical wiring on the indoor unit
depends on the type of indoor unit. For more information,
see the addendum book for optional equipment of the
indoor unit.
INFORMATION
Provide strain relief at indoor unit side by using the cable
tie and cable tie mounting that are included as accessory.
5.3

Closing the adapter

5.3.1

To close the adapter

1 Hook the front casing into the rear casing.
2 Insert the two screws from the accessory bag.
2×
NOTICE
After closing the adapter, check that the connection cable
is securely fastened.
5.4

Mounting the adapter

Mount the adapter to the indoor unit by making use of the holder and
tape that are included in the accessory bag.
NOTICE
▪ Make sure that the part of the indoor unit to which you
mount the holder is clean.
▪ Make sure to mount the holder to the indoor unit firmly,
so that it can bear the weight of the adapter.
5.4.1

To mount the adapter to the unit

1 Attach the double-sided tape to the adapter holder.
Installation manual
4
a
b
a Tape
b Adapter holder
2 With the tape, mount the holder to the indoor unit.
3 Slide the adapter into the holder.
INFORMATION
The exact location of the holder depends on the type of
indoor unit. For more information, see the addendum book
for optional equipment of the indoor unit.
6 Starting up the system
The adapter gets its power from the indoor unit. For the adapter to
function, make sure it is connected to the indoor unit, and the indoor
unit is powered on.
After powering on the system, the RUN and AP LEDs light up and go
out again after the adapter is operational. Depending on the system
layout, it can take up to 1 minute before the adapter is operational.
INFORMATION
Before starting up the system, make sure that the adapter
is closed and properly mounted to the indoor unit.
INFORMATION
For information on how to configure the system for use
with the adapter, and troubleshoot it in case of problems,
see the installer and user reference guide.
BRP069A71
WLAN adapter heating
4P595892-1A – 2019.12