Hydraulic Control Unit Use Reference Chart - Kubota L3240 Operator's Manual

70 HYDRAULIC UNIT
BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Soil
condition
Light
soil
Moldboard Medium
plow soil
Heavy
soil
Disc plow ---
Harrow
(spike,
springtooth,
disc type)
---
Sub-soiler ...
Weeder,
ridger...
Earthmover,
digger,
scraper,
manure fork, ---
rear
carrier.........
Mower (mid-
and rear-
mount type)
with Position control
Top link (1)
mounting
Position
holes
control
lever
1 or 2
2 or 3
3
2 or 3
2 or 3
Position
control
3
with Draft control
Top link (1)
mounting
Position
holes
control
lever
(2)
Draft
control
lever
1 or 2
Draft and
2 or 3 Mixed
control
3
2 or 3 Place the
draft
control
lever to the
suitable
position
and set the
2 or 3
implement
pull with
the
position
control
lever
Position
control
Hold the
draft
control
4
lever at the
most front
position
during
operation.
Gauge (1)
wheel
Telescopic
stabilizers
YES/NO Loose
YES
YES/NO
Tighten
NO
Remarks
Insert the
set-pin
through the
slot on the
outer tube
that align
with one of
the holes on
the inner bar.
For
implements
with gauge
wheels,
lower the
position
control lever
all way.
Telescopic
stabilizer
should be
tight enough
to prevent
excessive
implement
movement
when
implement is
in raised
position.