Every 400 Hours; Changing Transmission Fluid / Replacing Hydraulic Oil Filter - Kubota L3240 Operator's Manual

EVERY 400 HOURS

BChanging Transmission Fluid / Replacing
Hydraulic Oil Filter
To avoid personal injury:
A Be sure to stop the engine before changing the
oil filter cartridge.
A Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. Remove the drain plugs at the bottom of the
transmission case and drain the oil completely into the
oil pan.
2. After draining reinstall the drain plugs.
(1) Drain plugs
(1) Drain plug
(1) Drain plugs
3. Remove the oil filter.
(1) Hydraulic oil filter
4. Put a film of clean transmission oil on the rubber seal
of the new filter.
5. Quickly tighten the filter until it contacts the mounting
surface, then tighten it by hand an additional 1/2 turn
only.
6. Fill with the new KUBOTA SUPER UDT fluid up to the
upper notch on the dipstick.
(See "LUBRICANTS" in "MAINTENANCE" section.)
L3240, L3540
Oil
L3940, L4240, L4740
Capacity
L5040, L5240, L5740
PERIODIC SERVICE
42 L (11.1 U.S.gals.)
43 L (11.4 U.S.gals.)
45 L (11.9 U.S.gals.)
99