Self-Clean Mode - Speedcook Oven - TurboChef 30 Use And Care Manual

20 the speedcook oven
self-Clean Mode – speedcook oven
single wall oven & top double wall oven
Using heat up to 900°F (482ºC), the oven will self-clean the inside of the cook cavity in 4½ hours.
To initiate a self-clean cycle:
1. Make sure the cook cavity is empty and remove the oven rack.
Failure to remove the oven rack will cause the rack to discolor.
2. remove large particles and wipe standing liquids/grease.
TurboChef recommends removing the lower jetplate and cleaning beneath it prior to performing a self-clean cycle.
Failure to remove large food particles and wipe the oven down may result in smoke while the oven is self-cleaning.
3. select "self-Clean" as the mode.
4. press "start."
During the self-clean cycle, the oven door is locked and the oven surfaces can become very hot. When the cleaning cycle is complete and
the oven has returned to a safe temperature, the screen displays a message and the oven sounds a tone and powers down.
Turn the outer CookWheel knob to "Self Clean."
Oven surfaces are extremely hot
warninG:
during self-clean. DO NOT touch or attempt to use
the oven until self-clean is complete.
The top and bottom ovens CANNOT be
note:
self-cleaned at the same time.