2.1.3 Front control panel
1. Power button with power status LED
2. System ID button with ID LED
3. Network status LED
4. System health LED
5. VGA connector
6. USB2.0 connector (2)
Figure 3 Front control panel
1. Steady green light: the server is on.
2. Off: the server is off.
3. Blinking green: the server is DC off.
1. Steady blue light: the server is identified.
2. Off: the server is not identified.
3. Press 5 secs, initiate BMC reset.
1. Steady green light: the network is connected.
2. Blinking green light: the network is connected and active.
3. Off: the server is disconnected from the network or the server is
off.
1. Steady yellow light: key component failure.
2. Off: the server is off, or the server is on and is working correctly.
20