Save & Exit; Save Options; Default Options - Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual

3.8 Save & Exit
Use the arrow keys to select Save & Exit on top of the screen. The Save and Exit screen looks like below.

3.8.1 Save Options


Save Changes and Exit: Set this option to exit system setup after saving the changes.

Discard Changes and Exit: Select this option to quit the BIOS Setup without making any permanent changes to the system
configuration.

Save Changes and Reset: Select this option to reset the system after saving the changes

Save Changes: Select this option to save the changes from users and allow users to continue to make changes.

Discard Changes: Select this option to revert the changes from users.

Discard Changes and Reset: Select this option to reset the system without making any permanent changes to the system
configuration.
NOTE: The BIOS is reset when you select "Save Changes and Exit" option when users changes below BIOS setting:

L3 Cache Enable

Memory Operating Speed Selection.

3.8.2 Default Options


Restore Defaults: Select this option to restore the factory settings which is designed for maximum system stability, but not for
maximum performance.

Save as User Defaults: Select this option to enable the user to save any changes to the BIOS setup for future use.

Restore User Defaults: Select this option to retrieve user-defined settings that were saved previously.
80