Network Stack Configuration - Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual

Hardware Autonomous Speed

3.4.8 Network Stack Configuration

Setting
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
IP6 Configuration Policy
PXE boot wait time
If supported by hardware and set to 'Disabled', this will disable the hardware's ability to
change link speed except speed rate reduction for the purpose of correcting unstable link
operation. The default setting is 'Enabled'.
Description
Enable/Disable UEFI Network Stack
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot
support will not be available.
Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP
boot support will not be available.
Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot
support will not be available.
Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP
boot support will not be available
Support to Enable/Disable IPSEC certificate for kev.
Wait time in seconds to press ESC key to abort the PXE boot. Use
either +/- or numeric keys to set the value.
The default value: 0
57