Thinksystem Remote Management Module Quick Start; Prestart - Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual

4.3 ThinkSystem Remote Management Module Quick Start

This topic describes how to quickly acquaint with related operations of the Remote Management Module. In addition, it also describes
the advanced features of how to log on the module and options available while browsing, and how to log out.

4.3.1 Prestart

The Remote Management Module has an embedded Web server and an application with multiple standard interfaces. This topic
describes these interfaces and their usages. You can use the TCP/IP protocol to access these interfaces.
Note: As the supported functions of the product vary with configurations, refer to the actual product description.
For more information about the initial settings, see Chapter 3 "Configuration of the ThinkSystem Remote Management Module" on
page XXX. The user name in this topic is "lenovo". Besides "lenovo", other user names and passwords are also accepted. The default
user name and password are as follows:
• Username =ADMIN
• Password = ADMIN
The Remote Management Module is accessible through the standard HTML5 Web browser with
HTTP and HTTPS.
HTTP / HTTPS: The embedded Web server provides full access permission. You can access the Remote Management Module via
encrypted HTTPS protocol or HTTP protocol. When accessing through the HTTP protocol, note the following:
1. With access to ThinkSystem Remote Management Module via the HTTPS protocol, the browser may prompt you to trust and
install the security digital certification, and you just follow the prompts to import and confirm the certification.
2. In IE11 on the Microsoft® Windows Server® 2008 operating system, if using HTTPS protocol to access the Remote Management
Module, you need to do the following amendments to the Configure IE ESC item of the security information of the server manager, as
shown in the following figures
Figure 1. Configuring IE ESC - step
96