Front Control Panel - Lenovo ThinkServer RD230 User Manual

Connector
Power cord connector
Ethernet connector
Serial port
USB connector
VGA monitor connector

Front control panel

This section provides information about the front control panel of the server.
The following illustration helps you identify the connectors, controls, and LEDs on the front control panel of
your server.
Figure 3. Front control panel locations
1
USB connector
2
USB connector
3
ID button
4
NMI button
5
Reset button
6
Ethernet 1 status LED
The following table describes the meaning of the LEDs on the front control panel.
Table 3. Front control panel LEDs
LED State
Power LED On
Blinking
Off
Hard disk drive
Off
LED
Blinking
Ethernet 1
On
status LED
Blinking
Off
12
ThinkServer User Guide
Used to connect the power cord.
Used to attach an Ethernet cable for a local area network (LAN).
Used to attach a device that uses a 9-pin serial port.
Used to attach a device that uses a USB connector, such as a USB keyboard
or a USB mouse.
Used to attach a VGA monitor or other devices that use a VGA monitor connector.
7
Ethernet 2 status LED
8
Hard disk drive status LED
9
Power button and LED
10
System ID LED
11
System status LED
12
LED (will not be used in this server)
Color
Green The server power is on.
Green The server power is under S1.
Off The server power is off.
The hard disk drive is not active.
Off
Green The hard disk drive is active.
LAN is linked.
Green
Green LAN is active.
LAN is not linked.
Off
Description
Description