4
USB connectors (1 and 2)
5
VGA monitor connector
Connector
Power cord connector
Ethernet connector
Serial port
USB connector
VGA monitor connector
Front control panel
This section provides information about the front control panel of the server.
The following illustration helps you identify the connectors, controls, and LEDs on the front control panel of
your server.
Figure 3. Front control panel
1
ID button and LED
2
System status LED
3
Ethernet 1 status LED
10
ThinkServer Installation and User Guide
9
Ethernet connector 2 (share with MGMT)
10
PCI expansion slot
Used to connect the power cord.
Used to attach an Ethernet cable for a local area network (LAN).
Used to attach a device that uses a 9-pin serial port.
Used to attach a device that uses a USB connector, such as a USB keyboard
or a USB mouse.
Used to attach a VGA monitor or other devices that use a VGA monitor connector.
4
Ethernet 2 status LED
5
Power button and LED
Description