Boot Override; Server Management - Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual

3.8.3 Boot Override

Listed in this section are all the boot options for the system. Select an option and press Enter. The system will boot to the selected boot
option.

3.9 Server Management

Use the arrow keys to select Server mgmt on top of the screen. The Server mgmt screen looks like below.

BMC Support: Enable/Disable interface to communicate with BMC.

FRB-2 Timer: Enable/Disable Fault Resilient Booting (FRB-2) timer (POST Timer). When Enabled, BMC ensures that the
system completes BIOS POST operation.

FRB-2 Timer timeout: Enter value between 3 to 6 minutes for FRB-2 Timer Expiration value. The default value is 6 minutes.
 FRB-2 Timer Policy: Select what to do in case the FRB-2 Timer expires. The options are: 'Do nothing', 'Reset', 'Power
Down', and 'Power Cycle'.

System Event Log: Press Enter to go to the System Event Log setup screen. More information is in section 3.9.1.

BMC self-test log: Press Enter to go to the BMC self-test log setup screen. More information is in section 3.9.2.

View FRU information: Press Enter to go to the View FRU information setup screen. More information is in section 3.9.3.

BMC network configuration: Press Enter to go to the BMC network configuration setup screen. More information is in
section 3.9.4.

OS Watchdog Timer: If enabled, starts a BIOS timer which can only be shut off by the BMC after the OS loads. This helps to
determine that the OS successfully loaded.

OS Wtd Timer Timeout: Configure the length of the OS Boot Watchdog Timer. Not available if OS Boot Watchdog Timer is
disabled.

OS Wtd Timer Policy: Configure how the system should respond if the OS Boot Watchdog Timer expires. Not available if
OS Boot Watchdog Timer is disabled. Available options: Do nothing, Reset, Power Down, and Power cycle.
81