Related Manuals for FabiaTech Low Power Series
Summary of Contents for FabiaTech Low Power Series
- Page 1 FabiaTech Corporation IPC Solution Website: http://www.fabiatech.com Email: support@fabiatech.com Embedded CPU Board Low Power Series FB2653 User’ Manual MAY 2006 Version: 1.0 Part Number: FB2653...
- Page 2 FabiaTech shall not be reliable for technical or editorial errors or omissions, which may occur in this document. FabiaTech shall not be reliable for any indirect, special, incidental or consequential damages resulting from the furnishing, performance, or use of this document.
-
Page 3: Table Of Contents
Table of Contents FB2653 User’ Manual........................i Chapter 1 Introducing the FB2653 System ................. 1 Overview ............................ 1 Series Comparison Table ......................2 Layout ............................3 Specifications ..........................4 Packing List..........................5 Chapter 2 Hardware Installation ....................7 Before Installation ........................7 Hardware Features........................ - Page 4 Chapter 3 Installing CRT/LCD/Video ..................23 LCD FLAT PANEL DISPLAY.......................24 CRT & LCD DISPLAY ........................25 DB1: DVI connector....................26 CN3 & CN4: LCD Connector and Power Connector........26 CRT & TV-Out DISPLAY......................27 CN13: Connecting the S-Video Out ...............27 Chapter 4 BIOS Setup........................29 Overview ..........................29 BIOS Functions .....................30 ...
- Page 5 VGA Driver for WIN98SE/ME/2000/XP..................52 Audio Drivers..........................52 WIN 98/2000/XP Driver....................52 USB 2.0 Driver ...........................53 WIN 9X/ME Driver......................53 LAN Utility & Driver........................53 BIOS Flash Utility ........................53 Watchdog Timer ........................54 Watchdog Timer Setting.....................55 Watchdog Timer Enabled ..................56 Watchdog Timer Trigger .....................57 Watchdog Timer Disabled ..................57 Programming RS-485 ......................58 Chapter 6 Technical Reference ....................
-
Page 7: Chapter 1 Introducing The Fb2653 System
FabiaTech Corporation Chapter 1 Introducing the FB2653 System Overview The FB2653 series is a Low power AMD NX and all in one CPU board. This user’s manual provides information on the physical features, installation, and BIOS setup of the FB2653. -
Page 8: Series Comparison Table
FabiaTech Corporation Series Comparison Table Model FB2653 Processor Supports AMD Geode™ NX-1500 and NX-1750 CPU’s Chipset VIA KN400A+VT8237R Plus 1 184 Pin-DIMM (Max.) 1GB DDR333/266Mhz CRT VGA Yes(DVI) Watchdog Timer Multi I/O Four Serial ports Enhanced IDE and CF SATA Video Out USB 2.0... -
Page 9: Layout
FabiaTech Corporation Layout DIMM1 J2 J12 LED1 LED2 BUS1 CN12 CN13 CN14 CN11 CN10... -
Page 10: Specifications
FabiaTech Corporation Specifications Supports AMD Geode™ NX1500 1GHz Low Power CPU and NX1750 1.4GHz CPU. 5.25” (CDROM) size embedded board with PCI expansion bus. On board VGA (VIA KN400A) Supports DVI, LCD and Video out with up to 64MB share memory. -
Page 11: Packing List
FabiaTech Corporation Packing List Upon receiving the package, verify the following things. Should any of the mentioned happens, contact us for immediate service. • Unpack and inspect the FB2653 package for possible damage that may occur during the delivery process. - Page 12 FabiaTech Corporation...
-
Page 13: Chapter 2 Hardware Installation
FabiaTech Corporation Chapter 2 Hardware Installation This chapter introduces the system connectors & jumper settings, and guides you to apply them for field application. Before Installation Before you install the system board, make sure you follow the following descriptions. 1. Before removing the board from its anti-static bag, wear an anti-static strap to prevent the generation of Electricity Static Discharge (ESD). -
Page 14: Hardware Features
FabiaTech Corporation Hardware Features The following lists the connectors and jumpers to install the FB2653. Item Description 40-pin IDE Connector 7-pin SATA Connector 40-pin LCD Connector 5-pin Power Connector for LCD 20-pin ATX Power Connector CN6,CN7 10-pin IDC Connector for COM3 and COM4 CN9,CN10 RJ45-LAN Connector &... -
Page 15: J3: Cooling Fan Connector
FabiaTech Corporation J3: Cooling Fan Connector J3 is a 3-pin Molex connector and which is reserved for driving CPU or case cooling fan when non-low power CPU are used. DIMM1 J2 J12 LED1 LED2 BUS1 Description Ground +12V Speed-In CN12 CN13... - Page 16 FabiaTech Corporation 1. The J2 pin 11, 12 is a 2-pin for connecting Resistive Temperature Sensor input header and pin 13, 14 is a 2-pin for connecting to system reset button. It is because hardware reset of FB2653 and restart system booting.
-
Page 17: Cn11: Connecting The Keyboard And Mouse
FabiaTech Corporation CN11: Connecting the Keyboard and Mouse The CN11 uses the included adapter cable you can attach standard PS/2 type keyboard and mouse. Standard PS/2 keyboard can be plugged into this connector without any adapter cable. If PS/2 keyboard and mouse will be used simultaneously, a Y-type (3-terminal) adapter cable is needed. -
Page 18: Db1 & Cn6, Cn7: Connecting The Com Ports
FabiaTech Corporation The FB2653 supports a four port USB connector. Any USB device can be attached to USB ports with plug-and-play supported. The left side port is USB # 1/2 and the right side port is USB # 3/4 USB connector... - Page 19 FabiaTech Corporation JP3, JP4, JP5 & JP8: Select Power Source Jumper Select All Serial ports provide power source will driver the “RI” signal pin if JP3, JP4 for COM3, COM4 and JP5, JP8 for COM1, COM2 were located on the power output position.
-
Page 20: Cn12: Connecting The Audio Microphone In/ Speak Out
FabiaTech Corporation J7: 5-pin Infrared Header The J7 provide infrared signal is used to interface with Infrared modules. DIMM1 J2 J12 LED1 LED2 BUS1 Pin 1: VCC Pin 2: N.C. Pin 3: IRRX Pin 4: Ground Pin 5: IRTX CN12 CN13... -
Page 21: Cn1: Ide Hard Disk Connector
FabiaTech Corporation CN1: IDE hard Disk Connector CN1 is 40-pin 2.54mm IDC connectors. The IDE interface has one enhanced IDE channels and supports 2 IDE devices. DIMM1 J2 J12 LED1 LED2 CN1 – Hard disk connector BUS1 CN12 CN13 CN14... -
Page 22: Cn2: Serial Ata Hard Disk Connector
FabiaTech Corporation CN2: Serial ATA hard Disk Connector Use the included SATA cables; you can attach SATA hard disk drives. DIMM1 J2 J12 LED1 LED2 CN2 – Serial ATA connector BUS1 CN12 CN13 CN14 CN11 CN10 The following table lists the pin description of CN2. -
Page 23: Cn17 & Jp9: Compact Flash Socket And Master/Slave Select
FabiaTech Corporation CN17 & JP9: Compact Flash Socket and Master/Slave Select The Compact Flash socket CN17 (on the solder side) is optional and supports 3.3V Compact Flash and Micro Drives. JP9 is used to select master/slave device of this socket. Be sure to avoid the same master/slave setting with which connects to IDE#2 (CN1) connector, if you use CN17 and CN1 simultaneously. -
Page 24: Dimm1: Dimm Socket For Ddr Modules
FabiaTech Corporation DIMM1: DIMM Socket for DDR Modules You may extend additional memory to FB2653 See as following figure and rear pictures. The DIMM socket supports 128/256/512 MB and 1GB of DDR RAM modules. DIMM1 J2 J12 LED1 LED2 BUS1... -
Page 25: Cn5: Atx Power Connector
FabiaTech Corporation CN5: ATX Power Connector The connector connecting ATX power supply, you can connect CN5 to ATX power supply, and connect J2 (pin15 &pin16) to a push button switch as soft power switch. DIMM1 J2 J12 LED1 LED2 BUS1... -
Page 26: Jp1: Cmos Clear Jumper
FabiaTech Corporation JP1: CMOS Clear Jumper The CMOS store information like system date, time, boot up device, password, IRQ… that are set up with the BIOS. To clear the CMOS, set JP1 to open or 2-3 and then return to 1-2. The default setting is 1-2. -
Page 27: J12: Wake On Lan Jumper Header
FabiaTech Corporation J12: Wake On LAN Jumper Header This header is support wake on LAN. It’s power up the system when a wakeup packet or signal is received through the on board LAN. The default is 1, 2. DIMM1 J2 J12... -
Page 28: Led1 & Led2:On-Board Power/Hdd Led
FabiaTech Corporation LED1 & LED2:On-Board Power/HDD LED LED1 (Green) indicates power is active when it lights, and LED2 (Red) is HDD LED has two distinctive statues: off for inactive operation and blinking light for activity. DIMM1 J2 J12 LED1 & LED2... -
Page 29: Chapter 3 Installing Crt/Lcd/Video
FabiaTech Corporation Chapter 3 Installing CRT/LCD/Video This chapter describes the configuration and installation procedure of LCD, CRT and TV-Out displays. Both CRT and LCD displays or CRT and TV-Out may be used at the same time. However, each type of LCD requires different BIOS setting. This section describes the configuration and installation procedure using display. -
Page 30: Lcd Flat Panel Display
FabiaTech Corporation LCD FLAT PANEL DISPLAY Using the BIOS select setting for different types of LCD panel. Then set your system properly and configure BIOS setting for the right type of LCD panel you are using. DIMM1 J2 J12 LED1... -
Page 31: Crt & Lcd Display
FabiaTech Corporation CRT & LCD DISPLAY The board supports a CRT colored monitor and a LCD. It can be connected to create a compact video solution for the industrial environment. 32MB simulated VRAM allows a maximum CRT resolution of 1600X1200 with 64K colors. -
Page 32: Db1: Dvi Connector
FP17 FP18 FP19 FP20 FP21 +12 V FP22 FP23 Ground Ground ENABLK SHFCLK FP (VS) LP (HS) +5 V ENVDD ENAVEE Note: If any trouble when connecting FB2653 with LCD panels, you could contact technical support division of FabiaTech Corporation. -
Page 33: Crt & Tv-Out Display
FabiaTech Corporation CRT & TV-Out DISPLAY The board supports a CRT colored monitor and a TV-Out. It can be connected to TV-Out and CRT Monitor. TV-Out Display CRT Monitor DIMM1 J2 J12 LED1 LED2 BUS1 CN12 CN13 CN14 CN11 CN10 CN13: Connecting the S-Video Out The CN13 is RCA Jack support TV-Out display. - Page 34 FabiaTech Corporation...
-
Page 35: Chapter 4 Bios Setup
FabiaTech Corporation Chapter 4 BIOS Setup This chapter describes the BIOS setup. Overview BIOS are a program located on a Flash memory chip on a circuit board. It is used to initialize and set up the I/O peripherals and interface cards of the system, which includes time, date, hard disk drive, the ISA bus and connected devices such as the video display, diskette drive, and the keyboard. -
Page 36: Bios Functions
FabiaTech Corporation BIOS Functions On the menu, you can perform the following functions 1. Standard CMOS Features 2. Advanced BIOS Features 3. Advanced Chipset Features 4. Integrated Peripherals 5. Power Management Setup 6. PNP/PCI Configuration 7. PC Health States 8. Frequency/Voltage Control 9. -
Page 37: Keyboard Convention
FabiaTech Corporation Keyboard Convention On the BIOS, the following keys can be used to operate and manage the menu: Item Function To exit the current menu or message Page Up/Page Down To select a parameter To display the help menu if you do not know the... -
Page 38: Standard Cmos Feature
FabiaTech Corporation STANDARD CMOS Feature This section describes basic system hardware configuration, system clock setup and error handling. If the CPU board is already installed in a working system, you will not need to select this option anymore. Date & Time Setup Highlight the <Date>... - Page 39 FabiaTech Corporation You can select <AUTO> under the <TYPE> and <MODE> fields. This will enable auto detection of your IDE drives during boot up. This will allow you to change your hard drives (with the power off) and then power on without having to reconfigure your hard drive type.
- Page 40 FabiaTech Corporation Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1MB in the CPU’s memory address map. Total Memory System total memory is the sum of basic memory, extended memory, and other...
-
Page 41: Advanced Bios Features
FabiaTech Corporation Advanced BIOS Features This section describes the configuration entries that allow you to improve your system performance, or let you set up some system features according to your preference. Some entries here are required by the CPU board’s design to remain in their default settings. - Page 42 FabiaTech Corporation CPU Internal & External Cache This functions speeds up System access. The CPU has an internal cache. Available options: Disabled, Enabled Default setting: Enabled Quick Power On Self Test This option speeds up Power On Self Test (POST) after you power on the computer.
- Page 43 FabiaTech Corporation Default setting: 6 Typematic Delay (Msec) The number selected indicates the time period between two identical characters appearing on screen. Available options: 250,500 750 and 1000 Default setting: 250 Security Option This field enables password checking every time the computer is powered on or every time the BIOS Setup is executed.
-
Page 44: Advanced Chipset Features
FabiaTech Corporation Advanced Chipset Features This section describes the configuration of the board’s chipset features. DRAM Clock/Driver Control Current FSB/DRAM Frequency This display sent by the CPU host clock and DDR-RAM memory clock DRAM Clock This Select equates are used for determining the DDR-RAM Memory Clock frequency. -
Page 45: Agp & P2P Bridge Control
FabiaTech Corporation DRAM Timing If the installed SDRAM supports SPD function, select SPD. If not, you can select based on other access time of the SDRAM. Available Options: Auto By SPD, Manual, Turbo and Ultra Default setting: Auto By SPD DRAM CAS Latency Time This field specifies the latency for the Synchronous DRAM system memory signals. - Page 46 FabiaTech Corporation Available Options: Disable and Enable Default setting: Enable PCI1/2 Post Write This field specifies the PCI1/2 post write installed in the PCI expansion bus. Available Options: Disable and Enable Default setting: Enable System BIOS Cacheable The contents of the named ROM area are written to the same address in system memory (RAM) for faster execution.
-
Page 47: Integrated Peripherals
FabiaTech Corporation Integrated Peripherals This section describes the function of peripheral features. VIA Onchip IDE Device OnChip Primary/Secondary PCI IDE This field specifies the IDE channel that can be applied when using IDE hard disk connector. Available Options: Disabled, Enable... -
Page 48: Via Pci Device
FabiaTech Corporation IDE Primary/Secondary Master/Slave UMDA Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If you hard drive and your system software both support Ultra DMA/33, select Auto to enable This option allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive (HDD). -
Page 49: Super Io Device
FabiaTech Corporation Super IO Device OnBoard UART/IRQ Port 1/2/3/4, These fields select the I/O port address for each Serial port. Available Options: Disabled, 3F8H/IRQ4, 2F8H/IRQ3, and 3E8H/IRQ11, 2E8H/IRQ10. Default setting: 3F8/IRQ4, 2F8H/IRQ3, and 3E8H/IRQ11, 2E8H/IRQ10. OnBoard UART 2 Mode Select These fields item can select RS-232, RS-422 and RS-485 of select port 2. -
Page 50: Power Management Setup
FabiaTech Corporation Power Management Setup ACPI Function This filed specifies allow you enable Advanced Configuration and Power Management. When you use Windows/0S standby mode can set to enable. Available Options: Disabled, Enabled Default setting: Enable Power Management Option Select Enabled to activate the chipset Power Management and APM (Advanced Power Management) features. -
Page 51: Irq/Event Activity Detect
FabiaTech Corporation horizontal synchronization ports and write blanks to the video buffer. Blank Screen - This option only writes blanks to the video buffer. Select this option if your monitor supports the Display Power Management DPMS - Signal (DPMS) standard of the Video Electronics Standards to select video power management values. -
Page 52: Pnp/Pci Configurations
FabiaTech Corporation PnP/PCI Configurations Reset Configuration Data: Enable, Disable If you select Enable to reset Extended System Configuration Data (ESCD) when you exit setup is you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operation operating system cannot boot. -
Page 53: Irq/Dma Resources
FabiaTech Corporation X IRQ/DMA Resources IRQ-n/DMA-n Assigned: PCI Device and Reserved You may assign each system interrupt/DMA a type, depending on the type of device using the interrupt/DMA. PCI/VGA Palette Snoop When Enabled is selected, multiple VGA devices operating on different buses can handle data from the CPU on each set of palette registers on every video device. -
Page 54: Pc Health Status
FabiaTech Corporation PC Health Status On the Hardware Monitor Setup screen, you can monitor the system temperature, CPU voltage, and CPU fan speed… System Hardware Monitor In this field, you can monitor or detect the followings items. These items are view-only and cannot be changed. -
Page 55: Frequency/Voltage Control
FabiaTech Corporation Frequency/Voltage Control By choosing the Frequency/Voltage Control option from the Initial Setup Screen menu, the screen below is displayed. Caution: Incorrect settings in Frequency/Voltage Control may damage the system CPU, video adapter, or other hardware. -
Page 56: Password Setup
FabiaTech Corporation Password Setup There are two security passwords: Supervisor and User. Supervisor is a privileged person that can change the User password from the BIOS. According to the default setting, both access passwords are not set up and are only valid after you set the password from the BIOS. -
Page 57: Chapter 5 Software Installation
FabiaTech Corporation Chapter 5 Software Installation The enclosed diskette includes FB2653 VGA, Audio, USB, System and LAN driver. To install and configure you FB2653 system, you need to perform the following steps. System Driver WIN 98/2000/XP Driver Install KN400A Chipset, IRQ Routing, USB, AGP Driver and PCI IDE Bus Master Driver. -
Page 58: Vga Driver For Win98Se/Me/2000/Xp
FabiaTech Corporation VGA Driver for WIN98SE/ME/2000/XP Step 1: To install the VGA driver, insert the CD ROM into the CD ROM device, and enter DRIVER>VGA>KN400A>Win2K&WinXP, Win9X&WinME. Step 2: Execute SETUP.EXE file. Step 3: The screen shows the SETUP type. Press any key to enter the main menu. -
Page 59: Usb 2.0 Driver
FabiaTech Corporation USB 2.0 Driver WIN 9X/ME Driver Step 1: To install the USB driver, insert the CD ROM into the CD ROM device, and enter DRIVER>USB>VT8237R. Step 2: Start the "Add New Hardware" wizard in control panel (Click Start/Settings/Control Panel). -
Page 60: Watchdog Timer
FabiaTech Corporation Watchdog Timer This section describes how to use the Watchdog Timer, including disabled, enabled, and trigger functions. The FB2653 is equipped with a programmable time-out period watchdog timer. You can use your own program to enable the watchdog timer. Once you have enabled the watchdog timer, the program should trigger the I/O every time before the timer times out. -
Page 61: Watchdog Timer Setting
FabiaTech Corporation Watchdog Timer Setting The watchdog timer is a circuit that may be used from your program software to detect system crashes or hang-ups. LED1 on this CPU board is the watchdog timer indicator, which is located at the upper-left corner above the USB connector. -
Page 62: Watchdog Timer Enabled
FabiaTech Corporation Watchdog Timer Enabled To enable the watchdog timer, you have to output a byte of timer factor to the watchdog register whose address is 4Eh and data port is 4fH. The following is an Assemble program, which demonstrates how to enable the watchdog timer and set the time-out period at 28 seconds. -
Page 63: Watchdog Timer Trigger
FabiaTech Corporation Watchdog Timer Trigger After you enable the watchdog timer, your program must write the same factor as enabling to the watchdog register at least once every time-out period to its previous setting. You can change the time-out period by writing another timer factor to the watchdog register at any time, and you must trigger the watchdog before the new time-out period in next trigger. -
Page 64: Programming Rs-485
FabiaTech Corporation Programming RS-485 The majority communicative operation of the RS-485 is in the same of the RS-232. When the RS-485 precedes the transmission, which needs control the TXC signal, and the installing, steps are as follows: Step 1: Enable TXC... - Page 65 FabiaTech Corporation Initialize COM port Step 1: Initialize COM port in the receiver interrupt mode, and /or transmitter interrupt mode. (All of the communication protocol buses of the RS-485 are in the same.) Step 2: Disable TXC (transmitter control), the bit 0 of the address of offset+4 just sets “0”.
- Page 66 FabiaTech Corporation (TSRE, bit 6 of the address of offset+5) are all sets must be “0”. Step 4: Disabled TXC signal, and the bit 0 of the address of offset+4 sets “0” Receive data The RS-485’s operation of receiving data is in the same of the RS-232’s.
- Page 67 FabiaTech Corporation INPSTR$” RETURN REM Read one character from COM1: buffer INPSTR$=INPUT$(1,#1) RETURN NOTE: The example of the above program is based on COM1 (I/O Address 3F8h). The RS-485 of the FB2653 uses COM2. If you want to program it, please...
- Page 68 FabiaTech Corporation...
-
Page 69: Chapter 6 Technical Reference
FabiaTech Corporation Chapter 6 Technical Reference This section outlines the errors that may occur when you operate the system, and also gives you the suggestions on solving the problems. Topic include: Trouble Shooting for Post Beep & Error Messages Technical Reference Trouble Shooting for Post Beep and Error Messages The following information informs the Post Beep &... - Page 70 FabiaTech Corporation CMOS CHECKSUM ERROR This error informs that the CMOS has corrupted. When the battery runs weak, this situation might happen. Please check the battery and change a new one when necessary. DISK BOOT FAILURE When you can‘t find the boot device, insert a system disk into Drive A and press <...
- Page 71 FabiaTech Corporation MEMORY ADDRESS ERROR When the memory address indicates error, you can use this location along with the memory map for your system to find and replace the bad memory chips. MEMORY SIZE HAS CHANGED Memory has been added or removed since last boot. In EISA mode, use Configuration Utility to re-configure the memory configuration.
-
Page 72: Appendix
FabiaTech Corporation Appendix Dimension 203.2 16.4 20.9 24.9 18.5 29.4 28.7 20.6 15.6... -
Page 73: Technical Reference
FabiaTech Corporation Technical Reference Physical and Environmental DC Inputs: 24V/40VA Minimum Temperature: Operating 0°C ~ 50°C Relative humidity 5 % to 95 % non-condensing Surface Temperature of Chassis： 5°C to 45°C (W/HDD)/0°C to 50°C (W/CF card only) -
Page 74: Serial Ports
FabiaTech Corporation Serial Ports The ACEs (Asynchronous Communication Elements ACE1 to ACE2) are used to convert parallel data to a serial format on the transmit side and convert serial data to parallel on the receiver side. The serial format, in order of transmission and reception, is a start bit, followed by five to eight data bits, a parity bit (if programmed) and one, one and half (five-bit format only) or two stop bits. - Page 75 FabiaTech Corporation Bit 2: Enable Receiver Line Status Interrupt (ELSI) Bit 3: Enable MODEM Status Interrupt (EDSSI) Bit 4: Must be 0 Bit 5: Must be 0 Bit 6: Must be 0 Bit 7: Must be 0 Interrupt Identification Register (IIR) Bit 0: “0”...
- Page 76 FabiaTech Corporation Bit 5: Stick Parity Bit 6: Set Break Bit 7: Divisor Latch Access Bit (DLAB) MODEM Control Register (MCR) Bit 0: Data Terminal Ready (DTR) Bit 1: Request to Send (RTS) Bit 2: Out 1 (OUT 1) Bit 3: Out 2 (OUT 2)
- Page 77 FabiaTech Corporation Bit 4: Clear to Send (CTS) Bit 5: Data Set Ready (DSR) Bit 6: Ring Indicator (RI) Bit 7: Received Line Signal Detect (RSLD) Divisor Latch (LS, MS) Bit 0: Bit 0 Bit 8 Bit 1: Bit 1...