Toro Workman Topdresser 1800 Operator's Manual page 25

Figure 36
1. Capscrews (slider-frame rail)
3. Carefully rotate the hopper down onto the
slider-frame rails; refer to
Disassembling the Slider Bed (page
4. At each side of machine, secure the hopper
to slider-frame rails
capscrews, 2 washers, and 2 locknuts that you
removed in Disassembling the Slider Bed (page
23).
Figure 37
Right side shown
1. Capscrews (hopper mounting)
5. Tension the conveyer belt; refer to
the Conveyor Belt (page
Figure 32 of
23).
(Figure 37) with the 2
Tensioning
22).
Installing the Conveyer Chain
1. Assemble the chain onto the small sprocket and
secure the chain with the master link
g012670
1. Drive chain
2. Master link
2. If you loosen the motor-mount bolts, tension
the conveyer-belt chain, refer to
Conveyor-Belt Chain (page
3. Install the chain cover
g012668
1. Chain cover
25
(Figure
Figure 38
3. Motor
Tensioning the
21).
(Figure 39).
Figure 39
38).
g012666
g012659