Table of Contents
Advertisement
What's Included
Front Assembly
Strike Plates 1
X 4
X 4
X 4
X 4
X 6
X 8
Screws
Note: 1. For door frames with thickness of 40mm and above, it is
recommended to use the strike plate with an extended curved lip;
2. For doors with thickness of 40mm - 60mm, please use the shorter shaft;
for doors with thickness of 60mm - 70mm please user the longer shaft.
4
Back Assembly
AA Batteries x8
5 Emergency Keys
Back Plate
RFID Tags x2
Mortise Shafts 2 + Pin
Drill Sheet size: 186mm x 240mm
For Left-hand Door
IGM3/4
Drill Template
STEP 2
Align this Centre Line to the
desired door thickness of
the mortise lockcase to be
STEP 1
inserted into door edge.
32mm
Place drill template on the
(1-1/4")
inside door surface. Align solid
Door thickness:
folded line on door edge along
40mm
the top & bottom black arrows for
50mm
32mm & 70mm surface holes for
60mm
t.
drilling from back to fron
70mm
2.5mm
70mm
(2-3/4" )
54mm
24mm
Drill depth = 107mm
26mm
Backset = 70mm (2-3/4")
Drill Sheet &
Installation Guide
RFID Stickers x2
Mortise Assembly
Advertisement
Table of Contents
