Table of Contents
Advertisement
15
Using the Main Menu
2. Click STORAGE, then click the FTP tab.
3. Click to enable (
) / disable (
depending on your configuration.
4. Configure the following:
• Server Address: Enter the FTP server's address.
• Port: Enter the FTP port.
• Username: Enter your FTP username.
• Password: Enter your FTP password.
• Anonymous: Enable if your FTP server supports anonymous login.
• Storage Path: Enter the path to save recordings and/or snapshots to..
• File Size: Enter the recording file length in minutes.
• Camera: Select a camera to set FTP recording preferences for.
• Day: Select a day of the week to configure FTP recording settings for, or select All to apply
to all days of the week.
• Period 1 ~ Period 2: Select up to 2 periods of time where the system will save recordings
to the FTP. Check Alarm, MD (Motion Detection), or Continuous beside each period to
determine which recording type will be uploaded to the FTP.
• Image Upload Interval: Enter the interval between snapshots in seconds.
• Camera: Setup a camera to set the snapshots for.
5. Click Apply.
15.10 Account
See chapter 14 Managing Passwords and User Accounts, page 48 for details.
15.11 Information
Menus that show you different types of system information.
15.11.1 Version
The Version sub-menu allows you to view information about the current firmware installed on the
system.
#LX400111; r. 5.0/56647/56647; en-US
) FTP connection, and select either FTP or SFTP
83
Advertisement
Table of Contents
