Communication Connectors - SolarEdge SE3000H-US Installation Manual

Communication Connectors

A communication gland with multiple openings is used for connection of the various
communication options. The table below describes the functionality of each gland
opening. Unused openings should remain sealed.
Opening for cable size (diameter)
2.5 - 5 mm
4.5 - 7 mm, with cut
2 - 4 mm, with cut
The communication board has the following connectors:
Standard RJ45 terminal block for Ethernet connection
USB
RS485 connector
8-pin connector for power control devices
The SolarEdge Wi-Fi antenna, ZigBee or Cellular Plug-ins can be connected to the
communication board for optional wireless connection.
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.3
Chapter 6: Setting Up Communication to the Monitoring Platform
Figure 21: Communication Gland
Connection type
RS485
Ethernet (CAT5/6)
Antenna cable for wireless
communication
49