Page 2
Crazy Hoop CONTENT IMPORTANT SAFETY INSTRUCTIONS............2. 1. SPECIFICATIONS..................4. PACKAGE CONTENTS ............5. ASSEMBLE STEPS ..............6. LAYOUT ON CONTROL PANEL ......14. LINK GAME ..............15. 6. Adjustment……..................7. 7. Using and Maintenance................8 8. Installation Manual…................9 10. I/O Chart. 11. Wiring Diagram...
Page 3
Crazy Hoop Thank you for purchasing Crazy Hoop from UNIVERSAL SPACE. We hope you enjoy the product. This manual contains valuable information about how to operate and maintain your game machine properly and safely. It is intended for the owner and/or personnel in charge of product operation.
Page 4
Crazy Hoop No Touching Hazard: This part may be hot or can cause electric shock. Do not touch. Use the following safety guidelines to help ensure your own personal safety and to help protect your equipment and surrounding environment from potential damage.
Page 5
Crazy Hoop 1. SPECIFICATIONS (1) Work power: AC220V±10 50Hz or 110V±10 60Hz (As the actual voltage, please refer the label of the machine) (2) Power Consumption: Min 90W, Max 200W (3) Dimension: W1020×D2500×H2700 (mm) (4) Weight: About 260Kg (5) Condition: (Indoor) Temperature: -10℃~+40℃...
Page 6
Crazy Hoop 2. PACKAGE CONTENTS Open the package and make sure all the items are included: • 1 x Body Assembly,1 x Control panel Assembly, 1 x Marquee Assembly, 1 xBall gate assembly, 1 x playfield assembly. • Following accessories...
Page 15
Crazy Hoop 4. LAYOUT ON CONTROL PANEL Control panel: High voltage exit Link wire “Link2” exit Link wire “Link1” exit Low voltage exit Power cord exit Step 1:Connecting voltage High voltage wires go through wires go thrigh thishole this hole...
Page 16
Crazy Hoop 5 LINK GAME 5-1 There are two buttons on the control panel: Link Game button:Press this button to compete with others. Single Player:Press this button to have single player game. 5-2 Link game schematic: 5-3 How to link games:...
Page 17
Crazy Hoop Notice: When linking the game, there should be one game set as Game #1. Any of the games can be set as Game #1. The rest of the games can be #2 to #30 but you cannot repeat.
Page 18
Crazy Hoop 6. SET UP & INSTALLATION This product is an indoor game machine. Do not install outdoors. Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid Place the unit on a dry level surface Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
Page 19
Crazy Hoop 4-2 Level Adjustment Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game the game is installed on an unsuitable floor, it could cause a malfunction. To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the ground by 5mm.
Page 20
Crazy Hoop WARNING Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does not sit on the power cord as this could damage the cord and become hazardous. To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
Page 21
Crazy Hoop 5. PACKAGE For moving the game a short distance, just adjust the leveler and then move the game. For moving the game a long distance, it should be packed. Before operating the game, it should be assembled. How to remove the control panel:...
Page 22
Crazy Hoop Step 4: Remove screws on the two sides of the control panel. Step 5: Pull the control panel in the front. Step 6: The package should be the same as the factory original packing. 6. HOW TO PLAY Insert coin(s).
Page 23
Crazy Hoop 7. SWITCHES CONTROL SIGNAL 7-1 Refer to the attached I/O chart and the schematic. To adjust DIP SWITCH, please refer the I/O chart. The initial setting is in capitalization. Main board: 7-2 DIP Setting (Default Setting)
Page 24
Crazy Hoop 8. PARAMETER SETTING: 8-1 (1) Coin per Game: SW1-1 and SW1-2 are the switches to adjust how many coins to start the game. There are 4 options. DIP SW1 ITEM CONTENT NOTE Free play Coin per 1 coin for 1 game...
Page 25
Crazy Hoop (6) High Score Initial Value SW2-5 ~ SW2-6 are the switches to adjust the initial value of the high score setting. There are 4 options. DIP SW2 ITEM CONTENT NOTE High score setting is 150 High score High score setting is 200...
Page 26
Crazy Hoop (11)Win JP ticket SW3-8 is the switch to adjust if getting the JP ticket or not when you reach the JP score. There are 2 options. ( It is enabled when using JP Marquee) DIP SW3 ITEM CONTENT...
Page 27
Crazy Hoop 9-2 Handling Precautions When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine •...
Page 28
Crazy Hoop 10. TROUBLE SHOOTING Problem Cause Possible Solution No tickets in the game Refill and press the reset button Take the jammed tickets out and then press the Tickets are jammed No ticket reset button. dispensed Poor connection on the ticket Replace with a better connector.
Page 29
Crazy Hoop 11. OVERALL STRUCTURE 11-1 Main Part 1:...
Page 30
Crazy Hoop NO PART NO. NAME SPEC. NOTE FKLQ-1 Marquee FKLQ -2 Matrix board Display game information FKLQ -3 Left display Display the high score FKLQ -4 Middle display Display game time FKLQ -5 Front side bracket 1 left / 1 right...
Page 31
Crazy Hoop 11-2 Motion Assy. PART NO. NAME SPEC. NOTE FKLQ -23 φ20 FKLQ -24 Back Board 15mm FKLQ -25 Bearing Rack 3 mm FKLQ -26 Bearing Axis φ6 FKLQ -27 Bearing Track 1.5 mm FKLQ -28 Sensor Rack 1.5 mm...
Page 32
Crazy Hoop 11-3 Ball gate Assy PART NO. NAME SPEC. NOTE FKLQ -42 Ball Gate 1.5mm FKLQ -43 Hinge FKLQ -44 Bed Plate 15mm FKLQ -45 Fix Board FKLQ -47 Motor YN60-6Z/60JB100G8 FKLQ -48 Capacitor FKLQ -49 Motor Bracket FKLQ -50...