Post Behavior Screen Options - Dell Precision 3440 Small Form Factor Service Manual

Option Description
•
•
Default setting: Disabled
Deep Sleep Allows you to aggressive the system is at conserving power while Shut down (S5) or in Hybernate (S4) mode.
Control
•
•
•
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is enabled..
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN LAN signal.
•
•
•
•
•
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled

POST Behavior screen options

Option Description
Numlock LED This option specifies whether the NumLock LED should be on when the system boots.
•
Keyboard Errors This option option specifies whether the keyboard related errors are reported when it boots.
•
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extend BIOS This option created an additional pre-boot delay.
POST Time
•
•
•
Full Screen Logo . This option displays full screen logo if your image match screen resolution. The option Enable Full Screen Logo is
not selected by default.
Warnings and
•
Errors
•
•
Weekdays
Select Days
Disabled
Enabled in S5 only
Enabled in S4 and S5 (default)
Enable USB Wake Support
Disabled: This option is enabled by default.
LAN Only
WLAN Only
LAN or WLAN
LAN with PXE Boot
Enable Numlock LED: The option is enabled.
Enables Keyboard Error Detection: The option is enabled by default.
Minimal
Thorough (default)
Auto
0 seconds (default)
5 seconds
10 seconds
Prompt on Warnings and Errors (default)
Continue on Warnings
Continue on Warnings and Errors
System setup 63