Power Management Screen Options; Post Behavior Screen Options - Dell OptiPlex 7440 All-In-One W11C Owner's Manual

Power management screen options

Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC
Recovery to:
•
•
•
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
Deep Sleep Allows you to define the controls when Deep Sleep is enabled.
Control
•
•
•
Fan Control Controls the speed of the system fan. This option is disabled by default.
Override
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is disabled.
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN LAN signal.
•
•
•
•
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Intel Ready Mode This option enables the capability of Intel Ready Mode technology.

POST behavior screen options

Option Description
Numlock LED Specifies if the NumLock function can be enabled when the system boots. This option is enabled by default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by default.
70 System setup
Power Off (default)
Power On
Last Power State
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature does not work if you turn off your computer using the switch on a power strip
or surge protector or if Auto Power is set to disabled.
Disabled
Enabled in S5 only
Enabled in S4 and S5 – This option is enabled by default.
NOTE: When enabled, the fan runs at full speed.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Disabled
LAN Only
WLAN Only
LAN or WLAN