Intrusion Switch; Removing The Intrusion Switch; Installing The Intrusion Switch - Dell Precision 3440 Small Form Factor Service Manual

Steps
1. Place the side cover on your computer.
2. Slide the side cover towards the front of the system till you hear the release latch click.
Next steps
1. Follow the procedure in

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in
2. Remove the Side cover
About this task
The following images indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
Steps
1. Disconnect the intrusion switch cable from the connector on the system board.
2. Slide the intrusion switch from the system .

Installing the intrusion switch

Prerequisites
after working inside your computer.
Before working inside your computer.
Disassembly and reassembly 13