Expansion Card; Removing The Expansion Card - Dell Precision 3440 Small Form Factor Service Manual

Steps
1. Align the SD card reader with the screw holes on the system board and replace the two screws (M6X32).
2. Route the power supply cables through the retention clip on the SD card reader.
Next steps
1. Install the Side cover
2. Follow the procedure in

Expansion card

Removing the expansion card

Prerequisites
1. Follow the procedure in
2. Remove the Side cover
About this task
The following images indicate the location of the expansion card and provide a visual representation of the removal procedure.
34 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.