Steps
1. Align the notch on the expansion card with the connector on the system board.
2. Place the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Close the expansion card latch and press it until it clicks into place.
Next steps
1. Install the
Side cover
2. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
36
Disassembly and reassembly
After working inside your
computer.
before working inside your
computer.
Need help?
Do you have a question about the Precision 3440 Small Form Factor and is the answer not in the manual?