Post Behavior Screen Options; Manageability - Dell OptiPlex 5260 All-in-One Setup And Specifications Manual

Option Description
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN LAN signal.
•
•
•
•
•
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled

POST Behavior screen options

Option Description
Numlock LED This option option specifies whether the NumLock LED should be on when the system boots.
•
Keyboard Errors This option option specifies whether the keyboard related errors are reported when it boots.
•
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extend BIOS POST This option created an additional pre-boot delay.
Time
•
•
•
Full Screen Logo . This option displays full screen logo if your image match screen resolution. The option Enable Full Screen Logo is
not selected by default.
Warnings and Errors
•
•
•

Manageability

Option Description
USB Provision When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
Disabled: This option is enabled by default.
LAN Only
WLAN Only
LAN or WLAN
LAN with PXE Boot
Enable Numlock LED: The option is enabled.
Enables Keyboard Error Detection: The option is enabled by default.
Minimal
Thorough (default)
Auto
0 seconds (default)
5 seconds
10 seconds
Prompt on Warnings and Errors (default)
Continue on Warnings
Continue on Warnings and Errors
System setup 37