Post Behavior Screen Options; Virtualization Support Screen Options - Dell W11C002 Owner's Manual

Option Description
Block Sleep (S3 state)
Default setting: This option is disabled
Intel Ready Mode This option enables the capability of Intel Ready Mode technology.

POST behavior screen options

Option Description
Numlock LED Specifies if the NumLock function can be enabled when the system boots. This option is enabled by default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by default.
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extended BIOS This option creates an additional pre-boot delay and allows you to see the POST status messages. The options are:
POST Time
•
•
•
Full screen Logo This option displays the full screen logo if your image match the screen resolution. The option is disabled by default.
Warnings and This option causes the boot process to only pause when warnings or errors detected. The options are:
Errors
•
•
•

Virtualization support screen options

Option Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology (default).
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
54 System setup
Minimal
Through (default)
Auto
0 seconds (default)
5 seconds
10 seconds
Prompt on Warnings and Errors
Continue on Warnings
Continue on Warnings and Errors