Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive; Installing The M.2 2230 Pcie Solid-State Drive - Dell Precision 3440 Small Form Factor Service Manual

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5 in. hard drive
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the solid-state drive to the system board.
2. Slide and lift the solid-state drive off the system board.

Installing the M.2 2230 PCIe solid-state drive

Prerequisites
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
before working inside your
assembly.
computer.
Disassembly and reassembly 27