MiniMc-Gigabit ABOUT THE MINIMC-GIGABIT The MiniMc-Gigabit is a Gigabit Ethernet, miniature media converter. This device converts 1000Base-SX (multi- mode) or LX (single-mode) fiber to 1000Base-T copper, and always operates at full-duplex. Single-strand fiber versions are also available. The MiniMc-Gigabit offers plug-and-play operation, including the AutoCross feature that automatically selects between a crossover workstation or straight-through repeater hub connection, depending on the connected device.
5 to 90% (non-condensing); 0 to 10000 ft. altitude Dimensions: 2.1H x 4.6W x 8.5D cm (0.83H x 1.80W x 3.35D in) B+B SMARTWORX TECHNICAL SUPPORT USA/Canada: 1 (800) 346-3119 (Ottawa IL USA) Europe: +353 91 792444 (Ireland / Europe) Email: support@advantech-bb.com Web: www.advantech-bb.com...
MiniMc-Gigabit STATEMENTS, PRECAUTIONS, GUIDELINES, REGULATORY FCC RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
MiniMc-Gigabit ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units, containing electronic components. Always observe the following precautions when installing or handling these kinds of products. Do not remove unit from its protective packaging until ready to install. Wear an ESD wrist grounding strap before handling any module or component.