Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
391 HEPBURN MODULAR SOFA BY MATTHEW HILTON
4) ATTACH REMAINING MODULES
a) Place one of the remaining modules onto the leg frame, and
align it with the existing module. From below, ensure the holes
in the leg frame are aligned with the legs in the sofa body,
then insert an M8x60 bolt into each hole, and tighten firmly.
b) Repeat the above procedure for the remaining module(s).
If your sofa has multiple bases, be sure to adjust the align-
ment of the bases, as needed, during this process. When the
bases are aligned, firmly tighten the M6x16 Panhead Screws in
the connecting plates with an Allen Key.
c) Place the cushions on the sofa.
d) Assembly is now complete and the sofa is ready for use.
0
9
M
A
T
T
H
E
W
H
I
L
T
O
N
Advertisement
