Halma BEA FALCON-L Quick Start Manual

DESCRIPTION
1
2
TECHNICAL SPECIFICATIONS
Technology:
Transmitter frequency:
Transmitter radiated power:
Transmitter power density:
Detection mode:
Detection zone:
Min. detection speed:
Supply voltage:
Mains frequency:
Max power consumption:
Output:
Max. contact voltage:
Max. contact current:
Max. switching power:
LED-signal:
Mounting height:
Degree of protection:
Temperature range:
Dimensions:
Tilt angles:
Materials:
Weight:
Cable length:
Norm conformity:
Specifications are subject to changes without prior notice.
* Other use of the device is outside the permitted purpose and can not be guaranteed by the manufacturer.
** Measured in optimal conditions
FALCON-L
Opening sensor for automatic industrial doors*
microwave doppler radar
24.150 GHz
< 20 dBm EIRP
< 5 mW/cm²
motion
4 x 5 m (typical at 30° and field size 9)
5 cm/s**
12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
50 to 60 Hz
< 2 W
relay (free of potential change-over contact)
42V AC/DC
1A (resistive)
30W (DC) / 60VA (AC)
red: detection state, parameter indication, value indication
3.5 m - 7m
IP65
from -30 °C to + 60 °C
127 mm (L) x 102 mm (H) x 96 mm (W)
0° to 180° vertical
ABS and polycarbonate
400 g
10 m
R&TTE 1999/5/EC; EMC 2004/108/EC
1. front face
2. radar antenna
3. angle indication
4. bracket
5. cable
3
4
5