Scope Of Delivery; Parts Description; Technical Data - Parkside PWSAP 20-Li B2 Operation And Safety Notes

The product is not intended for sanding and
polishing .
Cut-off grinding: A separate guard must
be installed for this task . The guard can
be ordered via our customer service
(article number HG03642) .
Always use the correct accessory tools according
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using accessory
tools!
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries
and damage . The manufacturer is not liable
for any damages caused by improper use . The
product is not intended for commercial use or for
any other use .
˜ Scope of delivery
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1 x Cordless angle grinder 20 V
PWSAP 20-Li B2
1 x Auxiliary handle
1 x Guard for grinding (pre-installed) *
1 x Chuck key (stored in the auxiliary handle)
1 x Battery pack PAP 20 A3
1 x Rapid battery charger PLG 20 B1
1 x Carrying case
1 x Instruction manual
* Guard for cutting is not supplied and can be
ordered via our customer service .
˜ Parts description
Figure A:
1 Spindle lock button
2 Auxiliary handle threads
3 On/off switch
4 Grip handle
5 Battery pack
6 Auxiliary handle (with chuck key storage)
7 Chuck key
8 Guard for grinding
9 Directional arrow (on the guard)
10 Spindle
11 Backing flange
12 Locking flange (with tightening tab)
13 Cover with clamp
14 Directional arrow (on the angle grinder)
Figure B:
5 Battery pack
15 Release button for battery pack
button (charging level)
16
17 Charging level LEDs (red/orange/green)
Figure C:
18 Battery charger (rapid battery charger)
19 Power cord with power plug
20 Charging control LED – Green
21 Charging control LED – Red
Not illustrated:
22 Carrying case
˜ Technical data
Cordless angle grinder PWSAP 20‑Li B2
Rated voltage:
Rated speed n:
Accessory tool diameter:
Wheel thickness:
Spindle thread:
20 V
10000 min
–1
Ø 125 mm
max . 8 mm
M14
GB/IE 31