SATO Argox CP-EX Series User Manual page 35

CP-EX / CX Series
User Manual
Feed Button
Compact Printer Series - User's Manual
"Media Gap Not Found" or "Ribbon Out"
has been detected.

It will blink as soon as the printer module is
opened.
Note:
When the print head is over-heated, printer's
thermal protection function will be activated and
make READY LED blink to indicate printer is in
PAUSE status to wait till print head has been
cooled down. The printing tasks sent previously
will be resumed automatically later.
 Press to advance the label media to the first
printing position.
 Press during printing to make printer
"pause".
 Press and hold while switching on the
power to conduct media calibration and
print out a configuration profile.
To resume printing after "Media Out "or

"Ribbon Out " errors have been resolved.
31