Using Wps - ZyXEL Communications VMG1312-B Series User Manual

Chapter 4 Tutorials

4.3.2 Using WPS

This sect ion shows you how t o set up a wireless net work using WPS. I t uses t he Device as t he AP
and ZyXEL NWD210N as t he wireless client which connect s t o t he not ebook.
Not e: The wireless client m ust be a WPS- aware device ( for exam ple, a WPS USB adapt er
or PCMCI A card) .
There are t wo WPS m et hods t o set up t he wireless client set t ings:
• Push Bu t t on Configu r a t ion ( PBC) - sim ply press a but t on. This is t he easier of t he t wo
m et hods.
• PI N Con figu r a t ion - configure a Personal I dent ificat ion Num ber ( PI N) on t he Device. A wireless
client m ust also use t he sam e PI N in order t o download t he wireless net work set t ings from t he
Device.
Push Button Configuration (PBC)
1 Make sure t hat your Device is t urned on and your not ebook is wit hin t he cover range of t he wireless
signal.
2 Make sure t hat you have inst alled t he wireless client driver and ut ilit y in your not ebook.
3 I n t he wireless client ut ilit y, go t o t he WPS set t ing page. Enable WPS and press t he WPS but t on
( St a r t or W PS but t on) .
4 Push and hold t he W PS but t on locat ed on t he Device's front panel for m ore t han 5 seconds.
Alt ernat ively, you m ay log int o Device's web configurat or and go t o t he N e t w or k Se t t in g >
W ir e le ss > W PS screen. Enable t he WPS funct ion and click Apply. Then click t he Conn e ct but t on.
38
VMG1312-B Series User's Guide