Chapter1 Inspection And Installation; Verifying The Shipment - ITech IT8500plus Series User Manual

Chapter1 Inspection and Installation

1.1 Verifying the Shipment

Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect
with the appearance of the items, contact the dealer from which you purchased
the instrument immediately. The package contents include:
Checklist of Package Contents
Item
Electronic Loads
Power cord
CD
Ex-factory Test
Report
The IT8511+/IT8511A+/IT8511B+/IT8512+/IT8512A+/IT8512B+/IT8512H+/
IT8512C+/IT8512H+/IT8512C+/IT8513A+/IT8513C+ models have separately
sold optional accessories. Please refer to Chapter5 Communication
Interfaces for details of each accessory.
Device Name
Rack mount kit
RS232
Communication
Module
RS232
Communication
Module
Qty.
x1
x1
x1
x1
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met.
Model
IT-E151
IT-E121
IT-E121A
Copyright © Itech Electronic Co., Ltd.
Model Remarks
The IT8500+ series include:
IT8511+/IT8511A+/IT8511B+/IT8
512+/IT8512A+/IT8512B+/IT851
IT8500+ series
2C+/IT8512H+/IT8513A+/IT851
3B+/IT8513C+/IT8514C+/IT851
4B+/IT8516C+
User may select an appropriate
power cord that matches the
IT-E171/IT-E17
specifications of power socket
2/IT-E173/IT-E1
used in the area. See the
74
Section Connecting the Power
Cord for details.
It contains IT8500+ electronic
load User's Manual,
-
Programming Guide and other
user documentations.
It is the test report of the
-
instrument before delivery.
Accessories Description
Select this accessory when the user needs
to install the instrument on a special
bracket.
Select this accessory when users need to
use the standard RS232 extension cable to
connect the DB9 interface connector of the
DC load and
connector of
communication.
The DB9 interface connector of the RS232
changes from female to male, so that can
be directly connected to the standard LAN
interface.
Inspection and Installation
the RS-232 interface
computer for the
1